The High Dynamic Range or HDR is the distinction between a photo’s brightest and darkest parts. HDR photography involves the use of lighting, which creates distinct exposures, as the main context; in short, this is a photography technique, which is prevalent especially in the housing segment. The multiple exposures of a property are composited in real estate image blending to develop a better image than the actual shot.
There are instances when photos captured are overexposed, which means some parts of an image are too bright while other parts remain somewhat dark. Several photographers make use of natural light in place of an artificial lighting, but that has limitations. Of course, outdoor photography takes place during the daytime, so time and place is a factor that can influence lighting. Sunlight is often adequate when you shoot outdoors.
It would be tough to capture clearly visible photos indoors as you have to rely on lighting or ambiance light if shot during the day. If you shoot when natural light is at its best, then that can make your task easier. Further, time or exposure constraint can be overcome if good HDR photography complements real estate image editing services. More often than not, photography has to be done with the use of common equipment and following principles. The photography equipment shall include a remote trigger in order to reduce movement, a tripod for stability, and a flash for photography sessions that take place indoors.
Yet again, you can get outputs in quick turnarounds from real estate image editing services if you follow the principles of photography right through. To get fast and best results, photographers should be able to balance the extent of highlights and shadows or the brightest and darkest parts of a photo. For that, they also rely on best practices including the below-given ones. Since photography is technical and involves artistry, the efficient use of HDR is important to enhance the potential of a shot achieved in post-processing workflows.
Some Tips for HDR Photography
Turn off your camera’s flash, set your cam to aperture priority mode and switch it to metering mode. The metering mode is used for calculating the brightness of a photography subject, or the interiors and exteriors of a real estate property in this context. This is what maximizes the exposure of a shot captured by means of adjusting the shutter speed of a camera. Apart from that, make sure to position the focal point over a scene’s brightest part, so that it avoids the reflection of sunlight.